Glass Taxi – Modular Compatibility This backpack is part of our Modular system in the sense that it is compatible with our Pro Modular Speed Belt, and Modular components can be attached to the belt or to the rail that is located on the front of the bag. Modular components can be attached to the front rail. There is a “rail” on the front of the bag that allows Modular components to be attached. If you are carrying a big lens on the inside, such as a 400 or 500, then a popular attachment bag would be the Chimp Cage, which holds a SLR. Other popular attachments would be the Trim Changer or the Speed Changer which hold all of your accessories. Attaching the Pro Modular Speed Belt Put your Sped Belt into the slot on the bottom back of the bag. This allows you to wear the Pro Speed Belt with other Modular components attached such as the Lens Changer 50, Trim Changer, etc. THE BACKPACK CAN BE REMOVED WHILE STILL WEARING THE BELT (read below). Releasing the Pro Speed Belt while wearing the Glass Taxi This feature allows you to set up your Pro Speed Belt with your preferred configuration and to remove the backpack without taking off of your belt. This is accomplished with a Hook and Loop flap that holds the belt in position and wraps under the bag. To release the belt, grab under the bag and release the hook and loop (continue reading below). Releasing the Pro Speed Belt while wearing the Glass Taxi After you have released the hook and loop, pull up on the backpack and the flap will slide behind the belt and detach. This expedites the process of getting your gear to the shoot and setting up quickly. Depending on what you are wearing, it is possible to put the backpack on and insert the flap behind the belt, then attach the hook and loop. HOME | PRODUCTS | TO BUY | DESIGN ROOM | SHARE THE MOMENT NEWS | ABOUT US | CONTACT US © THINK TANK PHOTO 2004 - ALL RIGHTS RESERVED