Zoom In

This lens bag, designed for smaller lenses such as 50mm f/1.4, 85mm f/1.8 and teleconverters, rotates and locks for easy access (check dimensions for lens hood compatibility).

Key Features:
  • Rotate or lock components on the belt
  • Wide-mouth opening for quick access
  • Attaches to any Think Tank Photo belt or belt pack (sold separately)

 Gear Profile:

  • Smaller lenses such as 50mm f/1.4, 85mm f/1.8, and teleconverters
  • Other lenses without the hood can fit, such as the Nikkor 105mm macro
Technical Specifications:
  • Internal Dimensions: 6” H x 3.3" Diameter (15.2 x 8.4 cm)
  • External Dimensions: 6.4" H x 3.7 Diameter (16.3 x 9.4 cm)
  • Weight: 0.2 lbs (0.1 kg)


Exterior: For superior water-resistance, all exterior fabric has a durable water-repellant (DWR) coating, plus the underside of the fabric has a polyurethane coating. It also has 600D polyester, 420D high-density nylon, Ultra Stretch front pockets, high-density shock cord, nylon webbing, and 3-ply bonded nylon thread.

Interior: 210D silver-toned nylon liner, 2x polyurethane coated nylon 210T seam-sealed taffeta rain cover, closed cell foam, and 3-ply bonded nylon thread.

No Rhetoric Warranty on all Think Tank products


Feature #1 Accommodates teleconverters and small prime lenses with hood in shooting position.
Feature #2 Every modular component can be locked on a belt to keep bag in place on any of our camera belts.
Feature #3 Components can "Rotate or Lock" on the belt. To rotate, place the white plastic tang behind the belt while attaching the component. Rotating the component prevents the weight of the equipment from creating a pressure point on the hip by being stationary for an extended time. Also, moving the component to a different place on the belt allows a photographer to assume a different position such as kneeling, bracing against a wall, or lying prone without damaging gear. If locking the component in position is preferred, slide the plastic tang down into the fabric loop on the belt or rail while attaching the component. This prevents the component from sliding along the belt.
Feature #4 Wide mouth opening gives you quick access to your lenses.
Feature #5 One-hand drawstring closure secures your lenses while allowing you to focus on the next shot.
Feature #8 Outer stretch pocket provides space for a lens cap.
Feature #6 Smooth back finish on each modular component is easy on clothing and reduces friction while rotating.
Feature #7 Includes a seam sealed rain cover which is stored in a zippered pocket at the bottom of the pouch. When not using the rain cover, this pocket can be used to store a small accessory.
Attaches to all Think Tank Photo belts and belt packs.

Overall Product Rating:     

Not mentioned in the write-up or illustrated in the photos on the TTP website is a circular flap just below the drawstring collar, which seems intended to form a sort of lid over the lens. If you want to use the flap in this way then the internal height dimension is only 110 to 120mm. The quoted "internal" height of 152mm must assume you are happy to leave the rear cap of the lens sticking well out of the drawstring collar (even more than the Canon rear cap in one of the illustrations on the "features" tab of the product page), which seems to me like a really silly idea, a great way of losing the rear cap and scratching the rear element. Even when using the flap, the seal with the drawstring collar isn't great (and poor if the lens is short enough not to push the flap up against the collar) so best to avoid going anywhere dusty. Not impressed, or did I just miss the point of this type of bag ?

Amazing, convenient lens bag. Excellent quality, as you'd expect from Think Tank. It's very comfortable to wear on my belt and I hardly notice it's there unless there is a super heavy lens in there. This bag fits my small primes with room to spare (24 2.8, 35 f2, 85 1.8). With those small primes you can pull the drawstring and they won't fall out and will be protected mostly from the elements. There is also a rain cover that zips into the bottom portion of the bag. Great idea Think Tank! This pouch will also fit larger primes, such as the Canon 14mm 2.8, 24mm 1.4 and 35mm 1.4, although those lenses can be a littler tougher to pull out. They'll stick out of the pouch if you have the hood attached, which can also assist for quick lens changes. I also can through in even larger lenses, such as the 100 macro, 70-200 f4, and even the 70-200 f2.8IS. Of course, these lenses stick out of the bag. The only lens I've used that won't fit is the 85 1.2. It's a thick beast. The 50mm 1.2 fits, but is a tight fit.
You can make your purchase directly from Think Tank Photo. We ship directly to all U.S. states. When you place your order into the shopping cart and enter your zip code, you will be presented with a variety of shipping methods and their costs. Please select the one that best fits your requirements.

Alternately, you can visit our U.S. retailers. All Think Tank Photo authorized dealers who sell on the internet, sell at our MSRP ( Manufacturer’s Suggested Retail Price ). Please choose the dealer that you feel will give you the best service.

We have established distribution in many countries worldwide and are prepared to assist you in every way possible so that you can receive your product. To save shipping costs for each of our customers, we recommend to visit our Store Locator page to find the closest International Retailer in your location for your Think Tank Photo purchase.

Lens Changer 15 V2.0

Product: TT116
Lens belt pouch that accommodates teleconverters, small prime lenses and some kit lenses with their hoods in the shooting position.
Customer Rating:
(2 reviews)
Quantity: In Stock

Become A Friend - Join Our Facebook

The rotation180° professional from MindShift Gear will change the way you shoot! Learn more about MindShift Gear.

© 2015 Think Tank Photo, Inc. All Rights Reserved.  Website Optimization by Blast Advanced Media

Rate This Product

Please rate this product from a scale of 1 to 5 stars.