Share:
Zoom In

Now through April 15 2014, purchase any 4 Modular Components and get a free belt. Download the rebate form below for details.

Download Mail-in-Offer Form

Lens case specifically designed for the 24-70mm f/2.8, 100mm or 105mm macro with the lens hood in the shooting position (check dimensions for lens hood compatibility). 


Key Features:
  • Rotate or lock components on the belt
  • Wide-mouth opening for quick access
  • Attaches to any Think Tank Photo belt or beltpack (sold separately)
Gear Profile:
  • 24-70mm f/2.8 with the lens hood in the shooting position
  • 100mm macro with the lens hood in the shooting position
  • 105mm macro with the lens hood in the shooting position
Technical Specifications:
  • Internal Dimensions: 8.8" H x 4.3" Diameter (22.4 x 10.9 cm)
  • External Dimensions: 9.0" H x 4.5 Diameter (22.9 x 11.4 cm)
  • Weight: 0.3 lbs (0.1 kg)

Materials:

Exterior: For superior water-resistance, all exterior fabric has a durable water-repellant (DWR) coating, plus the underside of the fabric has a polyurethane coating. It also has 600D polyester, 420D high-density nylon, Ultra Stretch front pockets, high-density shock cord, nylon webbing, and 3-ply bonded nylon thread.

Interior: 210D silver-toned nylon liner, 2x polyurethane coated nylon 210T seam-sealed taffeta rain cover, closed cell foam, and 3-ply bonded nylon thread.

No Rhetoric Warranty on all Think Tank products

 

 

 

Features:
Feature #1 Accommodates 24-70 2.8 with hood in shooting position.
Feature #2 Every modular component can be locked on a belt to keep bag in place on any of our camera belts.
Feature #3 Components can "Rotate or Lock" on the belt. To rotate, place the white plastic tang behind the belt while attaching the component. Rotating the component prevents the weight of the equipment from creating a pressure point on the hip by being stationary for an extended time. Also, moving the component to a different place on the belt allows a photographer to assume a different position such as kneeling, bracing against a wall, or lying prone without damaging gear. If locking the component in position is preferred, slide the plastic tang down into the fabric loop on the belt or rail while attaching the component. This prevents the component from sliding along the belt.
Feature #4 Wide mouth opening gives you quick access to your lenses.
Feature #8 Outer stretch pocket provides space for a lens cap.
Feature #5 One-hand drawstring closure secures your lenses while allowing you to focus on the next shot.
Feature #6 Smooth back finish on each modular component is easy on clothing and reduces friction while rotating.
Feature #7 Includes a seam sealed rain cover which is stored in a zippered pocket at the bottom of the pouch. When not using the rain cover, this pocket can be used to store a small accessory.
Attaches to all Think Tank Photo belts and belt packs.

Overall Product Rating:     

Bought this to use with my Nikon 24-70mm F2.8, I had the V1 version that was nice but it was a tight fit and was hard to remove the lens from the pouch, this new V2 version with the wider mouth works perfectly with the 24-70, slips in and out of the pouch with no problems. Highly Recommended!

Now it's perfect! Previously, I had the V1 of the Lens Changer 35 and wasn't thrilled with how snug it was using it with my Canon 24-70. I'm not sure who tried it out before and thought the dimensions of the top opening were correct for its intended use. This V2.0 is what the V1 should have been to start with. Thanks to the Think Tank team for listening to customer input and making the changes needed to make a good product great.

This pouch is wide enough to receive a Nikkor 28-70 f/2.8 with hood in place, which has a wider hood than the current 24-70 f/2.8 from Canon or Nikon. No snags, it just works. It feels better built than competing products, and looks great too!
NOTICE TO OUR DOMESTIC CUSTOMERS:
You can make your purchase directly from Think Tank Photo. We ship directly to all U.S. states. When you place your order into the shopping cart and enter your zip code, you will be presented with a variety of shipping methods and their costs. Please select the one that best fits your requirements.

Alternately, you can visit our U.S. retailers. All Think Tank Photo authorized dealers who sell on the internet, sell at our MSRP ( Manufacturer’s Suggested Retail Price ). Please choose the dealer that you feel will give you the best service.

NOTICE TO OUR INTERNATIONAL CUSTOMERS:
We have established distribution in many countries worldwide and are prepared to assist you in every way possible so that you can receive your product. To save shipping costs for each of our customers, we recommend to visit our Store Locator page to find the closest International Retailer in your location for your Think Tank Photo purchase.

Lens Changer 35 V2.0

Product: TT136
Belt pouch that accommodates a 24-70mm f/2.8 or medium length macro lenses with lens hood in shooting position.
Customer Rating:
(3 reviews)
$31.75
Quantity: In Stock

Become A Friend - Join Our Facebook

The rotation180° professional from MindShift Gear will change the way you shoot! Learn more about MindShift Gear.

© 2014 Think Tank Photo, Inc. All Rights Reserved.  Website Optimization by Blast Advanced Media

Rate This Product

Please rate this product from a scale of 1 to 5 stars.

×